Power problems are a common concern for homeowners because unexpected voltage fluctuations can destroy electronic devices. This is why many homeowners use voltage stabilizers. They often pair them with freezers, computers, and the like, but not necessarily with television sets. Does smart TV need a stabilizer?
Smart TVs use an inbuilt SMPS to maintain stability in the TV’s power supply. They also have a wide operating voltage range. Technically speaking, they can survive voltage fluctuations. Thus, smart tv doesn’t need a stabilizer.
However, you are still expected to apply caution by investing in a voltage stabilizer with surge protection just in case you encounter lightning strikes and short circuits that result in deadly surges.
Smart televisions, in particular, are so expensive that you would expect consumers to go out of their way to protect them from voltage fluctuations. However, some people are not convinced that stabilizers are necessary in the first place. But are they right? Can you safely operate your smart TV in the absence of a voltage stabilizer? As you will soon see, the answer to that question is ‘Yes’ and ‘No’.
- Read Is Voltage Stabilizer Required For Inverter AC?
Why Are Voltage Stabilizers Necessary?
A lot of people own stabilizers because their retailer told them that the device would keep their electronic appliances safe. But what does that actually mean? What do voltage stabilizers do and what is this threat they protect consumers from?
For electronic appliances to operate safely, their power source has to keep the voltage within a specific range. If the voltage falls below that range, the appliances in question won’t work the way they are supposed to. This can either destroy them or reduce their lifespan in the long run.
If the voltage exceeds the required range, it will destroy the sensitive components in your appliances. Your service provider goes out of their way to ensure that your home receives a stable flow of current. But voltage fluctuations can occur on occasion. These two things can happen as a result:
1). Under Voltage – This is where the voltage falls below the required range.
2). Over Voltage – This is where the voltage rises above the required range
The best voltage stabilizers are designed to respond to both of these occurrences. If the voltage falls, they will raise it. If the voltage spikes, they will lower it. In doing so, as its name suggests, a stabilizer will maintain stability.
It ensures that your electronic appliances receive a reliable flow of electricity. That is true for older CRT television sets. But what about smart televisions?
- Read Does Voltage Stabilizer Increase Electricity Bill?
Do Smart TV Need Stabilizer?
Technically speaking, smart televisions can survive without a stabilizer. There are two factors that make this possible:
1). Switching Model Power Supply
Modern television sets have mechanisms that can protect them from voltage fluctuations. They have an SMTPS that, according toDong Yang, maintains stable DC Voltage. SMTPS are efficient devices that generate less heat. Because they convert power more efficiently, their presence reduces the risk your smart television faces from voltage fluctuations.
2). Voltage Range
Smart televisions have an advantage over their CRT counterparts because they have a much wider voltage range within which they can safely operate. AsHome-Xpoints out, the average Smart television can work with voltages as low as 150V.
They are more than capable of surviving bouts of under-voltage. And if the voltage falls below the range within which the smart TV can operate, rather than suffering any significant damage, it will just turn off.
While they have limitations, smart TVs are far better equipped to deal with voltage fluctuations than older, less sophisticated models.
Why You Need a Stabilizer For Your Smart TV?
Smart Television sets don’t require stabilizers. However, you are still encouraged to add one to your unit. Consider the following:
Your location matters. People that live in regions with a stable power supply can get by without a voltage stabilizer. However, places like India have wild voltage fluctuations that are more than capable of overwhelming your smart TV’s inbuilt defense mechanisms. If you know that your region’s power supply is volatile, then a stabilizer is essential to your smart television’s survival.
This is also true for locations with shoddy wiring and hardware where sudden blackouts and short circuits are a frequent occurrence.
The average smart television can operate within a voltage range of 170 to 270V. For that reason, it can survive without a stabilizer, but only where ordinary fluctuations are concerned. Your television is less likely to survive surges caused by lightning strikes.
Short circuits are just as dangerous. A voltage stabilizer that has surge protection will protect your television from extreme voltage spikes.
Even if short circuits and lightning strikes are rare in your region, you are still encouraged to buy a stabilizer. This precautionary measure will put your mind at ease, especially if your smart TV is very expensive.
Choosing a Stabilizer For Your TV
You cannot select an appropriate voltage stabilizer for your television set without taking the following into account:
Some people believe that they can apply the same stabilizer to every electronic device in their home. Sometimes, this is true. But in many cases, some stabilizers are designed to be used on specific devices. For instance, a stabilizer that was made solely for use with a freezer might not work on a television set.
Before you buy a stabilizer, read the manual. If you can’t buy a stabilizer dedicated to smart televisions, make sure that the stabilizer you purchase is compatible with various appliances, including TVs.
Smart Home Guidewants people to realize that stabilizers have different operating ranges. Look for stabilizers whose operating range matches the voltage fluctuations in your region. You should also match the stabilizer to your television’s power consumption.
According toIt Still Works, stabilizers can be passive or active. Active devices can either raise or lower the voltage where necessary. Passive devices can prevent voltage spikes from destroying your appliances but they cannot increase it in cases of under-voltage. The type you select will depend on the kinds of fluctuations your area encounters.
5 Best Stabilizer For Smart TV
1. Norstar DAVR-3000 3000 Watt:
This stabilizer can work as a step up and step down transformer. The automatic voltage stabilization ensures that your LED TV is always safe. The dual display helps you monitor the voltage at the input of the stabilizer and the output.
Moreover, with individual circuit breakers’ help, you can be sure that your device is entirely safe. The new generation CPU inside ensures that the monitoring of the voltage level happens automatically. That is why you can use it for high load appliances like refrigerators and televisions as well. It is rated up to a power rating of 3000 W. Whichever way you look at it, this stabilizer for LED TV does not disappoint.
2. Starlite 5000 Watt Step Up/ Down Voltage Converter:
Do you prefer a stabilizer with an even higher power rating?
If so, you should consider this option. The power rating is 5000 W. That ensures that you can use them not just with LED TVs but even with the heaviest refrigerators. The ability to work as a step up and step down transformer makes it versatile.
Moreover, the automatic voltage regulation means that you will not have to worry about monitoring it consistently. The heavy-duty cord makes it easy to use it day in and day out. The display allows you to monitor the voltage always. You cannot go wrong with this stabilizer for TV.
3. Regvolt AC-3000 Transformer:
The next option which we are highlighting now works as a step up and step down transformer. Not only that, it works with 110 V and put in 220 V input. You can use it anywhere around the world. Moreover, the 2 AC grounded outlets ensure that it is safe for LED TVs and refrigerators, and other devices. The power rating of 3000 W ensures that you will have no complaints.
The circuit breaker ensures that your LED TV is entirely safe. It has a fuse protector, which is another reason to go for it. The US plug adopter and the Shuko plug, which comes along with it, make it easy to use. The metal casing makes it wear and tear-resistant. If you’re looking for a sturdy stabilizer with grounded outputs, you should consider this one.
4. 5000 Watt Voltage Regulator
This stabilizer can handle power up to 5000 W. It can work as a step up and step down transformer. The voltage regulation makes it perfect for LED TVs. The circuit breaker technology makes it safe to use with any gadget.
The industrial-grade cord facilitates heavy-duty use. The compact design and the voltage monitoring mechanism ensure that you can use it in the way you want. Thus, if you’re looking for an industrial-grade stabilizer for LED TV, this one fulfills that requirement.
5. Regvolt 3000 Watt Deluxe Automatic Voltage Converter Transformer:
The advantage of this stabilizer for LED TV is that it can handle 3000 W of power. Not only that, it has the step-up and step-down capability. Due to the same, it can work with any input voltage as well.
The circuit breakers ensure that your device is extremely safe. Also, the voltage output stabilizer ensures that your LED TV will always get an accurate input voltage. With the help of a dual display, it is easy for you to understand the voltage at the stabilizer’s input and the output of the stabilizer. That allows you to monitor the working of the stabilizer consistently. The high power rating and the step-up and step-down capability make this one of the best stabilizers for TVs.